Skip to product information
1 of 9

Cherry Blossom Clouds · Imperfect Sapphire

Cherry Blossom Clouds · Imperfect Sapphire

Metal
Ring Size (US)

A one-of-a-kind ring in 14 karat yellow, with a natural, untreated silky sapphire. The stone is the colour of an early morning, set in a handcarved east-west bezel with delicate cherry blossoms on either side.

About the Imperfect Sapphire

The centre sapphire is completely unique with a soft, cloudlike appearance, selected for its beautifully unique misty colour and surprising blue flash under direct sunlight. However, due to its delicate size and natural rutile inclusions, the stone has become slightly stressed by the setting process, resulting in a few micro-fractures that can be seen under higher magnification. The ring is priced with these imperfections in mind; hoping it will find a beloved home regardless :)

You can learn more about the stone and its details below.

Ring Details

· 100% Canadian gold.

· Shiny, mirror-polished finish.

· The centre sapphire is 0.1 carats. The visible face of the sapphire measures about 4.6 mm by 6.3 mm.

· The six-sided bezel at the centre measures about 5.4 mm by 8.8 mm.

· Band width (from the top to bottom of the band) is 1.9 mm.

· Band thickness (from the inside of the ring to the outside) is about 0.95 mm.

Stone Details

The sapphire in this ring was originally mined in the Luc Yen region; purchased directly from a woman-owned gem business in Vietnam. It is an unheated and untreated misty white sapphire, with rutile inclusions that give it a faint lavender or bluish glow under direct light.

The sapphire contains two minor imperfections. There is a small chip to the back of the stone, invisible when worn. On the face of the stone, there are two thin scratches, visible only under magnification (they cannot be felt with a fingernail). These tiny scratches appear to be the result of the inner crystals (rutile inclusions) reaching the surface of the stone.

I believe that these imperfections were caused by the pressure applied during stone-setting: given the delicate size of the stone, the force of setting caused the presence of internal crystal structures to be pushed upward through the sapphire, eventually reaching the surface.

Fortunately, such surface-reaching inclusions often remain stable (not damaging the stone further), as long as there is no more extreme pressure applied to the ring (the type of pressure used during goldsmithing, rather than day-to-day wear). For this reason, I also recommend against having the ring resized.

Though I have been quite hesitant to bring an imperfect piece to the collection, I hope you will still find it worthwhile! For months I had intended to cut this ring apart and recycle the metal - but every time I return to it, I still find it so beautiful and can't bear to take it apart. As with all my work, it is always made with the finest materials and deepest care; only this time with a few small scars, and a bit of a story to tell.

If you have any further questions, you can always reach out to me. :)

Ready to ship in 3-5 days

One of a kind and ready to ship - you will receive the ring pictured here.

Please give me 3-5 business days to prepare your parcel and take it to the post.

Jewellery Care

Please be gentle with your jewellery :)

Avoid wearing jewellery to the swimming pool.

Solid gold can be worn in the bath or while washing up.

Read the full care guide here.

About Untreated Sapphires

Commercial sapphires (the kind you normally see in deep, clear blue) typically go through a heat treatment to improve the clarity and colour of the stones.

Sapphires which remain untreated often appear more pastel-like, with a soft inner appearance that have a shimmering, misty, or opalescent effect. The visual effect of untreated sapphires is caused by the presence of needle-shaped crystals (rutile inclusions), which reflect and diffuse light in unexpected ways through the stone. These stones often have much more visual depth, with the dreamy appearance of sunlight through clouds or water.

View full details

Bespoke & Bridal

Customize any design into the wedding band or engagement ring of your dreams!

Learn more about bespoke, or send me your questions below.

Contact form